Busch Carbide Burs - Saw


Ordering Information and Recommendations

Safety and Hygiene Recommendations for Rotary Instruments

Busch - Figure 231FL

Carbide Cutters


231FL
This is a Busch carbide saw cutter.

FIG 231FL CARB CIRCULAR SAW 0.2MM

After preparing the holes in which the gems are to be set for the pav? setting with the twist 4205S and the corresponding round bur 1AU, then a clean cross-wise cut is made in the spaces with the new circular saw 231F/FL/FLX.
Only the chatons remain for the final setting of the gems. Make your choice between the three flattest working part lengths, available in 0.2, 0.3 and 0.4 mm which is most appropriate for your high-grade work. The special serration of this circular saw gives the material a brightly shining surface in the bottom of the cut, for instance in platinum, titanium and steel, as well as in gold, silver and their alloys.

Recommend speed: 7.500 - 30.000 r.p.m.

Pave Settings - 231FL.pdf




ITEM ORDER NUMBER:
Size
ISO 500 ... ... ...
D1
L
2231FL23
023
2,30 mm
0,3 mm


Busch® is a registered trademark of Pfingst & Company