Pfingst & Company, Inc.
Precision Tools & Products For Jewelry Manufacturers, Dentistry, Artists, & Hobbyists

.

 

 


Recomended Speeds
Busch® Carbide Burs

The following speeds are for guidance only. Variations above or below these speeds according to manner of use and particular material may also be satisfactory. Always use safety glasses.

Recommended Speeds
 


 

Safety Recommendations
Busch® Carbide Burs

• Maximum contact pressure: 0,3—2 N
• Instruments have to be fully inserted in chuck
• Ensure that chucks of the handpiece are cleaned regularly
• Avoid leverage and jamming
• Use eyeshield and aspiration
• Maximum admissible speed has to be observed (indicated on each BUSCH box and in our chart above)
• Instruments should reach the operating speed before they are applied to the work piece
• Sufficient cooling water spray (minimum 50 ml/min) is to be used for certain preparation application in dental practice


 

Hygienic Recomendations
Busch® Carbide Burs

Instruments have to be disinfected and, if necessary, sterilized before use.

Disinfection and cleaning:
• Put instruments into a bath with suitable disinfection and cleansing liquid.
• Afterwards, clean the instruments manually or by ultrasonic bath.
• After cleaning the instruments, dry immediately.

Sterilization:
• Following the disinfection and cleaning, the instruments can be sterilized in the autoclave, chemiclave, or hot-air sterilizer.
• Before the sterilization, the instruments have to be put into a case or foil permeable to germs and suitable for sterilization.
• After the sterilization, the instruments in the case or foil should be kept in a dry and dustfree place.

 

Busch® Carbide Bur Categories:
Surgical Instruments | Finishing Burs | Excavating Burs | Fissure Burs | Speedies
Oral Surgery Burs | Cutters | Cutters for Milling | Shorties | Bur Storage

Ordering Information
Recommendations


 

About Pfingst | New Products | Product Catalogs | Busch Burs
Horico Diamonds | Flex Shaft | Edenta Polishers | Jewelry Mfrs | Map
Contact Pfingst | Home

Pfingst & Company, Inc.
105 Snyder Road, South Plainfield, New Jersey 07080
Phone: 908-561-6400 / Fax: 908-561-3213
Business Hours: 8:30 a.m. to 4:30 p.m. EST

PfingstCo.com - Pfingst & Company, Inc. - All Rights Reserved © 2002-2003