|
.
|
Handpieces
— Page 1
Flexible
Shaft Machines
All handpieces on this page are manufactured by Pfingst &
Compnay. |
 |
330
Handpiece
Length 5-1/4”. Diameter 1”. Collet capacity 0-5/32”.
Ball bearing with adjustable key chuck. Not supplied with duplex
spring connection. Speeds to 14,000 rpm. Also available open
end style.
Light-but-sturdy handpiece can be held near to working end
without coming into contact with chuck. May be used continuously
without heating. Having grease sealed ball bearings, no lubrication
is required.
330-0E Handpiece —
Same as 330 but with open end.
|
 |
440
Handpiece
Length 5-1/2”. Diameter 1”. Ball bearing with collet
type chuck. Collet capacities 3/32” to 1/4”. Q.D.
type, to facilitate snapping on and off flexible shaft. Delivered
complete with 1/4” collet unless otherwise specified.
High capacity handpiece for heavy duty. May be used continuously
without heating. Having grease sealed ball bearings, no lubrication
is required.
440 C Collets —
Available in: 3/32, 1/16, 1/8, 5/32, 3/16, 7/32, 1/4”.
Click here for Collet and Wrench Set.
|
 |
88 Handpiece
Length 6-1/2”. Diameter 5/8”. Collet capacity 1/32”
TO 1/8”. Ball bearings. Delivered with 3/32” collet
unless otherwise specified. Extra collets available 1/32”,
1/16” and 1/8”. Speeds to 14,000 rpm. (Tightening
nut exposed.)
|
|
|
88D
Double Ball Bearing Handpiece
Handpiece with duplex spring connection and Q.D. assembly
10”. Diameter 5/8”. Collet capacity 1/32” to
1/8”. Two ball bearings. Delivered with 3/32” collet
unless otherwise specified. Speeds to 14,000 rpm.
Slightly
larger than 55D. High quality handpiece with two ball bearings
to prevent heat.
Duplex
spring also serves as safeguard to the handpiece and shaft
if the handpiece should stall.
|
|
55 Handpiece
Length 6-1/4”. Diameter 9/16”. Collet capacity 1/32”
TO 1/8”. Bearings semi-oilless. Delivered with 3/32”
collet unless otherwise specified. Extra collets available
1/32”, 1/16” and 1/8”. Speeds to 10,000 rpm.
(Tightening nut exposed.)
55C Collets —
1/32”, 1/16”, 3/32”, 1/8” for No. 55 and
No. 88 handpieces.
|
|
|
55D
Handpiece
Handpiece, duplex spring connection and Q.D. assembly 10”.
Diameter 9/16”. Collet capacity 1/32” to 1/8”.
Bearings semi-oilless. Delivered with 3/32” collet unless
otherwise specified. Speeds to 10,000 rpm. (Tightening nut
exposed.)
Duplex
spring also serves as safeguard to the handpiece and shaft
if the handpiece should stall.
Go to Next Page
|
Flexible Shaft Machine Categories:
Motors
| Rheostats | Handpieces
| Sheaths & Shafts
| Accessories
About
Pfingst
| New Products | Product
Catalogs |
Busch Burs
Horico Diamonds | Flex
Shaft | Edenta Polishers | Jewelry
Mfrs | Map
Contact Pfingst |
Home
Pfingst
& Company, Inc.
105 Snyder Road, South Plainfield,
New Jersey 07080
Phone: 908-561-6400 / Fax: 908-561-3213
Business Hours: 8:30 a.m. to 4:30 p.m. EST
PfingstCo.com - Pfingst
& Company, Inc. - All Rights Reserved ©
2002-2003
|
