101/9S QD Connection
For heavier duty work use handpieces with Q.D. connections only.

300/1 & 101/9S QD are manufactured by Pfingst & Company

432D Ball Bearing Handpiece
Handpiece 4”. Handpiece with duplex spring connection and Q.D. assembly 9-1/2”. Takes 3/32” shanks only.

The most comfortable handpiece at the end of your flexible shaft.

Assures accurate chucking and concentricity.

Duplex spring also serves as safeguard to the handpiece and shaft if the handpiece should stall.

ABD Faro Ball Bearing Handpiece
Handpiece with duplex spring connection and Q.D. assembly 11”. Available with 3/32” or 1/8” spring lock chuck. Speeds to 18,000 rpm.

For light industry.

AC Faro Ball Bearing Handpiece
Same as ABD in Q.D. connection only. Handpiece with QD 7”.

P081.020

154-P Hammer Points
(Standard)

20D Hammer Handpiece
Handpiece, duplex spring connection and Q.D. assembly 8-1/2”, Diameter, Stroke 1/32”.

This slim, lightweight, cam-action tool is excellent for varied uses.

Speeds up to 5,000 rpm continuously or up to 10,000 rpm intermittently.

Comfortable grip reduces fatigue during prolonged use.

Poly Trimmer —
Indispensible in the modern Dental Laboratory!

611QD Poly-Trimmer for Q.D.
Ball bearing, chrome plated. May be connected to any flexible shaft motor equipped for Q.D. connection. The new, stronger Q.D. design, for direct attachment to flexible shaft, means longer lasting, trouble-free operation.

This multi-purpose handpiece is invaluable in the modern lab–for embedding; cutting; removing impressions; as a riveting hammer, as a vibrator and for many other applications. Handpiece 6-1/2”.

  220 640 Set of Seven

Poly-Trimmer Tools—
210 612 Complete Set of Tools
210 613 Large Wide Chisel
210 614 Large Groove
210 615 Small Groove
210 616 Slanted Chisel (1-7)
210 617 Narrow Chisel
210 618 Riveting Tool
210 619 Vibrator Tool
220 640 Poly-Trimmer Holder (at right)

Go to Previous Page